Driveways & patios
Driveway, patio & path cleaning
Dirt, moss, algae and weeds steam cleaned from block paving, slabs, concrete and steps, without the cost of replacing them.
How we do it
Inspection and quote
We check the size, material, access and condition, including oil marks, growth, loose joints and drainage, then give you a clear quote.
Preparation
Movable items are cleared and, where it helps, a pre-treatment loosens moss, algae and stubborn staining.
Deep steam clean
We work methodically across the surface with professional steam equipment, taking care with joints, edges and the material.
Re-sanding or regrouting
Block paving gets fresh kiln-dried sand once dry. Damaged patio joints can be regrouted as a separate service.
Optional sealing
A compatible sealer can protect suitable surfaces and make future cleaning easier, once the paving is fully dry.
Bring outdoor surfaces back to life
Driveways, patios and paths get used every day and face every season. Sweeping and a quick rinse only shift loose dirt. Growth clings to textured paving and spreads through the joints, and grime soaks into porous stone.
Our steam-led process uses controlled heat and water to break that down and lift it away, leaving a brighter surface with more of its natural colour showing. It also prepares paving for fresh jointing sand or a sealer, so you can have a full restoration rather than a basic wash.
Surfaces we clean
- Block-paved driveways and parking areas
- Concrete, tarmac and paved driveways
- Patios and garden seating areas
- Paths, walkways, steps and entrances
- Brickwork and other hard landscaping
- Commercial yards and access areas
What cleaning can remove
Dirt, traffic film, moss, algae, lichen, green growth on shaded areas and loose weeds in joints all respond well. Deep oil, rust, paint or old discolouration may need specialist treatment and might not disappear completely. We'll set realistic expectations once we've seen the surface.
Driveways & patios FAQ
Do I need to move furniture and plant pots?
Yes, where you can. Clearing furniture, bins, ornaments and vehicles lets us clean the whole area evenly. Let us know about anything heavy before the day.
Will my block paving need re-sanding?
Usually. A deep clean lifts loose jointing sand, so re-sanding with kiln-dried sand is normally recommended and can be included in your quote once the surface is dry.
Can you seal the surface on the same day?
Often not. The paving needs to be fully clean and dry before sealing, so depending on the surface and the weather, sealing may be a second visit.
Do you bring your own water?
We can use our own water supply where required. We'll confirm access and water needs when we quote.
Free quotes
Need it clean? Just call.
Free, no-obligation quotes for homes and businesses. Ring Mike or Gerard and tell us what needs doing.